Skip to Content

Loading products...

 

Dryers for Sale at Kelly's: Find the Right Dryer for Your Oregon Home

A reliable dryer is what turns laundry from a chore into a routine. Kelly's has been a family-owned Oregon retailer since 1974, and our laundry category includes one of the largest dryer selections in the Willamette Valley and Southern Oregon, with gas dryers, electric dryers, heat pump dryers, ventless dryers, and matching dryers for laundry pairs.

Shop Dryers by Type

Dryers fall into three main types at Kelly's, and which one fits depends mostly on the hookups you have and how much you dry at a time.

  • Electric Dryers: Run on a standard 240V outlet (or 120V on select ventless models) and are easier to install than gas because no gas line is required.
  • Gas Dryers: Heat up faster and often cost less to run if natural gas is cheaper than electricity in your part of Oregon. Requires a gas hookup near the dryer.
  • Portable Dryers: Compact, vent-free dryers built for spaces where a full-size dryer will not fit.
 Electric DryersGas DryersPortable Dryers
Install240V outlet, most need a vent (heat pump and condenser variants are ventless)Gas hookup plus a vent


Standard 120V outlet, no vent

CapacityAround 4.0 to 9.0 cu ft Around 7.0 to 9.0 cu ftAround 1.5 to 4.3 cu ft
Drying timeStandardFastestSlower per load
Best for
Most Oregon homes with an existing dryer outlet and ventHomes with a gas hookup that want the fastest cyclesApartments, RVs, ADUs, dorms, and small laundry spaces

 

What to Consider When Buying a New Dryer

Picking the right dryer comes down to four things: your hookups, your capacity needs, your venting situation, and the features that actually make a difference. Here is how each one shapes the decision.

Fuel Type and Hookups

Start with what you already have. If your laundry room has a 240V dryer outlet and no gas line, an electric dryer is the simpler swap. If you have a gas hookup, a gas dryer will heat up faster and typically cost less per cycle to run. Heat pump dryers usually run on a standard 120V outlet, which makes them the easiest install of any dryer type if you do not have a 240V circuit. Learn more about the difference between heat pump and condenser dryers on our blog.

Size and Capacity

Match your dryer capacity to your washer and your lifestyle. A washer in the 4.5 to 5.0 cubic foot range pairs with a dryer in the 7.0 to 7.4 cubic foot range. A family of five or larger or anyone drying king-size bedding regularly should look at 8.0 cubic feet or more. Undersized dryers are the single most common reason customers replace them within five years.

Ventilation

Most dryers require an external vent. Heat pump and condenser dryers do not, which makes them the right answer for condos, ADUs, and finished basements without a clean route to the outside. If you have an existing vent, have it cleaned before installing a new dryer. Lint buildup behind a vented dryer is the leading cause of dryer fires nationally.

Key Dryer Features to Look For

After type, the features below are what move the needle most for our dryer customers. Each one is a filter you can apply directly to this page to narrow the lineup to dryers that have it built in.

  • Energy Star Dryers: Certified for lower energy use, which adds up on your utility bill, especially in households running multiple loads a week.
  • High Efficiency Dryers: Models that use less energy per load, typically through heat pump or condenser technology, and moisture sensors that end the cycle as soon as clothes are dry. The smarter pick if you do a lot of laundry.
  • Dryers with Steam Option: Refreshes garments without rewashing, reduces wrinkles on finished loads, and is one of the features customers say they would not give up once they have it.
  • WIFI Enabled Dryers: Cycle alerts to your phone, remote start, lint filter reminders, and integration with smart home apps. Most useful in households where the dryer runs overnight or while you are out.

Oregon Hookup Notes from Our Team

A few Oregon-specific hookup details come up often enough to call out before you finalize a dryer pick.

  • Gas dryer availability varies by city. Newer construction often has a gas stub in the laundry room. Older homes in Salem or Corvallis may not. If you are not sure, snap a photo of your laundry room and bring it in.
  • Older homes and 120V dryer outlets. Many homes built before the 1960s in Salem and Corvallis were wired for a 120V outlet, not a 240V dryer circuit. Heat pump dryers can solve this without an electrician.
  • Vent length and routing. Dryer vents should typically run no more than 25 feet with no more than two 90-degree bends. Longer or more complicated routes lead to long dry times and lint buildup. If your vent is too long, a heat pump or condenser dryer is a cleaner solution than re-routing the vent.
  • ADU and condo restrictions. Many newer ADUs and condos in Eugene, Salem, and the Portland metro require ventless drying because there is no clean route for an exterior vent. If you are not sure what your building allows, check your HOA rules or building specs before shopping.

How Kelly's Helps You Choose a Dryer

Every Kelly's showroom puts the dryer lineup in front of you in person and pairs you with a no-pressure expert who knows the features in and out. Some of the questions we walk customers through include:

  1. What are your hookups? Fuel source and outlet decide the dryer type before anything else.
  2. What does your washer hold? The dryer capacity needs to roughly double the washer capacity for efficient drying.
  3. What features matter to you? Steam, sanitize, smart features, reversible door, or simply rugged reliability.
  4. Are you replacing or buying new? New installs may need plumbing or electrical work.

Find Your Next Dryer at Kelly's in Oregon

Picking the right dryer comes down to your hookups, the capacity you need, and how your space handles venting. Kelly's has been a family-owned Oregon retailer since 1974, with four showrooms in Salem, Corvallis, Eugene, and Central Point where you can see dryers in person, talk through your space with no pressure, and back every purchase with our Price Match Guarantee and optional Allstate Protection Plans.

Browse the lineup above, contact our team online, or stop by any of our Oregon appliance showrooms to see the dryers in person.

 

Frequently Asked Questions: Dryers

What is the difference between an electric dryer and a gas dryer?

The heat source. Electric dryers use an electric heating element; gas dryers use a gas burner. Gas dryers cost more up front but typically heat faster and run cheaper per cycle if natural gas is cheaper than electricity in your area. Electric dryers are simpler to install since they only need a 240V outlet for heating, though both typically require an exterior vent.

Is a gas dryer better than electric​?

Neither is universally better. Gas heats faster and often runs cheaper per cycle, but only if you already have a gas hookup. Electric is simpler to install and comes in ventless variants. If you do not have a gas line, electric usually wins.

How do I know what size dryer I need?

A good rule of thumb is that the dryer capacity should be roughly double the washer capacity. A 4.5 cubic foot washer pairs well with a 7.0 to 7.4 cubic foot dryer. A family of five or more, or anyone drying king bedding regularly, should look at 8.0 cubic feet or larger

Are ventless dryers more expensive?

Up front, yes. Heat pump dryers, in particular, can cost 20 to 50 percent more than a comparable vented model. The energy savings are real, with the Estimated Annual Energy Use typically around a third of vented models according to Energy Star. If you do not have a vent option, the cost comparison is moot; ventless is the only path.

Is a steam dryer worth it?

If you wear dress clothes regularly or have a lot of wrinkle-prone fabrics, yes. These cycles refresh garments between wears, reduce wrinkles on dried loads, and reduce the time you spend ironing. If your wardrobe is mostly casual, steam matters less.